DTF / UV Printer Annual Service - Tier 1

Service Description

🔹 What This Service Is (8Hr-Booking Slot to combat double booking - Actual On-site hours will vary depending on machine condition- Only on-site hours invoiced - Maximum 8hrs) This service is a professional health check and optimisation visit for small-format DTF and UV printers that use a single printhead with shared ink delivery components. It’s designed to catch problems early, improve reliability, and reduce downtime—without invasive strip-downs or part replacement. Think of it as a mechanical + operational MOT for your printer. 🔹 Who It’s For Small-format DTF printers Entry-level UV flatbeds Epson-based or converted platforms Owners who want fewer clogs, better consistency, and early warning of failures Especially useful if: White ink is giving you grief The printer isn’t used daily You want preventative care rather than reactive repairs 🔹 What We Actually Do (In Practice) ✔ Ink System Health Check We inspect and assess the entire ink path for: Poor flow, air ingress, loose fittings Early contamination White ink separation or settling issues This helps prevent clogs before they reach the printhead. ✔ Printhead Assessment (Non-Invasive) Nozzle pattern evaluation Electrical health checks (no disassembly) Head height and alignment verification Strike-risk analysis (media vs head clearance) This focuses on protecting the printhead, not replacing it. ✔ Maintenance Station Inspection Cap seal condition Pump suction and waste ink flow Waste routing integrity A failing cap or pump is one of the biggest causes of repeat clogs—this service targets that early. ✔ Software & Calibration Review Firmware version check Basic RIP configuration sanity check Encoder and feed calibration (where applicable) No re-profiling or advanced tuning—just making sure nothing is fundamentally wrong. ✔ Environment & Usage Review Temperature and humidity suitability Ink agitation routines Maintenance habit Operator feedback and guidance This part often prevents repeat issues more than hardware fixes. 🔹 What the Client Gets ✔ Reduced clogging ✔ More consistent nozzles ✔ Early fault detection ✔ Clear, written service report with findings and recommendations 🔹 What This Service Does Not Include (Tier 1 Limits) ✖ No printhead replacement ✖ No electronics replacement ✖ No deep strip-down ✖ No full contamination flush (available as a separate quoted service) Covered by Laserprints full T&Cs 👉 https://www.laserprints.co.uk/terms-and-conditions